Technical Data | |
Length (product) approx. | 460mm |
Width/depth (product) approx. | 145mm |
Height (product) approx. | 280mm |
Net weight approx. | 8.3kg |
Adjusting range plasma | 20 – 40A |
Duty cycle plasma | 60% |
Current at 100% DC 40°C Plasma | 30A |
Supply voltage | 160-275V |
Mains frequency | 50/60Hz |
Air consumption | 120l/min |
Pressure | 5bar |
Standard | EN 60974-1:2012, EN 60974-10:2014 |
EMC class | A |
Explanation EMC class | This Class A welding equipment is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. |
Marking | CE |
Power consumption plasma | 4.9kVA |
Quality cutting steel (ST37) approx. | 15mm |
Separating cut steel (ST37) approx. | 20mm |
Quality cutting stainless steel approx. | 15mm |
Separating cut stainless steel approx. | 20mm |
Quality cutting aluminium approx. | 14mm |
Separating cut aluminium approx. | 16mm |
Required generator output | >7.8kVA |
Open circuit voltage | 385V |
Connection cable length | 2,2m |
Input current | 33,9A |