Technical Data | |
Length (product) approx. | 2630mm |
Width/depth (product) approx. | 1550mm |
Height (product) approx. | 1800mm |
Net weight approx. | 1743kg |
Drive motor output | 3.75kW |
Supply voltage | 400V |
Mains frequency | 50Hz |
Spindle speed | 1450min¯¹ |
Grinding disc external diameter | 355mm |
Grinding disc width | 38mm |
Grinding disc drill hole | 127mm |
Surface grinding table clamping surface length | 600mm |
Surface grinding table clamping surface width | 300mm |
Surface grinding table max. weight workpiece | 300kg |
x axis travel speed | 5 – 25m/min |
- For precision surface grinding in the industrial sector
- Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
- High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
- Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
- Automatic central lubrication for all slides and spindles
- Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
- Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
- Second grinding wheel flange included in delivery
Automatic feed control AD 5
The fsM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results.