Metallkraft HMBS 340 CNC-DG-X Fully automatic two-column horizontal metal bandsaw
Metallkraft HMBS 340 CNC-DG-X Fully automatic two-column horizontal metal band saw with ARP system for miter cuts from +60 ° to -45 ° and material feed with 1000 mm length
| Technical Data | |
| Length (product) approx. | 3030mm |
| Width/depth (product) approx. | 3150mm |
| Height (product) approx. | 2000mm |
| Net weight approx. | 2150kg |
| Length max. (product) approx. | 3050mm |
| Max. width/depth (product) ca. | 3050mm |
| Height max. (product) approx. | 2100mm |
| Drive motor output | 3.0kW |
| Supply voltage | 400V |
| Mains frequency | 50Hz |
| Engine power hydraulic pump | 0.6kW |
| Engine power coolant pump | 0.12kW |
| Absorbed power | 4.5kW |
| Protection class drive motor | IP 55 |
| Nominal operating mode drive motor | S1 |
| Total current consumption | 12.3A |
| Total connected load | 8.5kW |
| Saw band speed(s) | 20 – 100m/min |
| Speed levels | worm gear |
| Saw band length | 4780mm |
| Saw band width | 34mm |
| Saw band thickness | 1.1mm |
| Cutting angle | 4° |
| Feed | ball screw |
| Lifting the saw bow | 350mm |
| Cutting range 0° round (tube) | 350mm |
| Cutting range 0° round (solid material) | 350mm |
| Cutting range 0° rectangular lying (hollow profile) | 500 x 340mm |
| Cutting range 0° rectangular horizontal vertical section | 500 x 340mm |
| Cutting range 0° bundle (tube) | 500 x 180mm |
| Cutting range -45° round (tube) | 350mm |
| Cutting range -45° round (solid material) | 350mm |
| Cutting range -45° rectangular horizontal (hollow profile) | 380 x 340mm |
| Cutting range -60° round (tube) | 230mm |
| Cutting range -60° round (solid material) | 130mm |
| Cutting range -60° rectangular horizontal (hollow profile) | 220 x 340mm |
| Cutting range +45° round (tube) | 350mm |
| Clamping range +45° round (full material) | 350mm |
| Cutting range +45° rectangular horizontal (hollow profile) | 350 x 340mm |
| Material feed rate | 3.82m/min |
| Material feed max. at 1 x feed rate | 1000mm |
| Material feed max. | 9999mm |
| Material feed min. | 1mm |
| Table height material feed | 800mm |
| Cut-off length min. | 1mm |
| Material diameter min. | 30mm |
| Min. remaining workpiece length 30° | 310mm |
| Min. residual workpiece length 45° | 750mm |
| Min. residual workpiece length | 100mm |
| Min. remaining workpiece length automatic | 310mm |
Related products
