Optimum OPTImill MF 2V Drilling-milling machine (3 Phase 400v)
$17,290.00
Features:
- Heavy, solid design made of high-quality Meehanite cast iron
- Drilling frictional head inclinable ± 45 °
- High concentricity due to tapered roller bearing, measured smaller than 0.01 mm in the quill
- Automatic quill feed
- Adjustable drilling depth stop with millimeter scale, front readable
- Right / left rotation for thread cutting
- X- and Z-axis with adjustable dovetail guide
- Coolant system
- Height-adjustable protective screen with micro-switch, against flying chips and parts, for maximum protection of the user
- Massive and large-dimensioned XY stage, precisely surface-finished with T-slots
MF 2V:
- Y-axis with adjustable dovetail guide
OPTI control panel:
- Integrated control panel
- Integrated digital position indicator DPA 21 with speed display
Room amenities:
Siemens SINAMICS G110M converter
- Due to compact design especially EMV contracted
- Internal security features
- made in EU
MF 2V: Y-axis with adjustable dovetail guide.
Included as Standard:
• Power Feed to Quill-3 rate
• Servo Type Feed & Rapid for Longitudinal
• Up & down Motorised for MF4V
• One-Shot Lubrication
• Coolant System
• Electrically Interlocked Spindle Guard
• Large Size Base Tray
• Low Volt Machine Light
• 3 Axis DRO • Frequency inverter Siemens.
Product shown is MF 4V for representation purposes.
Optimum OPTImill MF 2V Drilling-milling machine
Multifunctional drilling and milling machines for professional use. Electronically stepless drive with frequency converter “made in EU” and digital 3-axis position indicator DPA 21
A new milling machine could be just what you need. Large bed mills, universal mills, turret mills down to drill/mills and not forgetting those accessories.
| Dimensions and weights | |||
| Length (product) approx. | 1400mm | Height (product) approx. | 2150mm |
| Width/depth (product) approx. | 1450mm | Net weight approx. | 950kg |
| Drilling/milling output | |||
| Max. size milling head | 76mm | Max. size shaft milling cutter | 18mm |
| Drilling performance steel (S235JR) | 24mm | Continuous drilling performance steel (S235JR) | 20mm |
| Electric Data | |||
| Supply voltage | 400V | Mains frequency | 50Hz |
| Milling table horizontal | |||
| Horizontal milling table length | 1244mm | Horizontal milling table T-groove size | 16mm |
| Horizontal milling table width | 230mm | Horizontal milling table T-groove number | 3 |
| Min. clearance vertical spindle – horizontal milling table | 57mm | Horizontal milling table T-groove spacing | 63mm |
| Max. clearance vertical spindle – horizontal milling table | 463mm | Horizontal milling table max. load bearing capacity | 230kg |
| Cooling lubricant system | |||
| Coolant pump(s) drive power | 100W | ||
| Standards and certifications | |||
| Standard | DIN EN 55011 | EMC level | C2 |
| Travel | |||
| Travel X axis manual | 800mm | Travel Z axis manual | 406mm |
| Travel Y axis manual | 305mm | Travel X axis automatic | 730mm |
| Vertical spindle | |||
| Vertical spindle reach | 213 – 533mm | Vertical spindle quill stroke | 127mm |
| Vertical spindle spindle chuck | ISO 40 DIN 2080 | Vertical spindle speed control |
electronically adjustable
|
| Vertical spindle speed range | 10 – 5100min¯¹ | Vertical spindle quill feed |
0.04 / 0.08 / 0.15mm/rev
|
| Vertical spindle swivel range milling cutter head Z – X plane | ± 45° | Vertical spindle drive motor output normal operation | 1.5kW |
| Vertical spindle number of gears | 6 | ||
| Electrical connections | |||
| Total rated value | 2.2kW |
| Brand | OPTImill |
|---|
Related products
