Optimum OPTIturn TH 5630D Center and Spindle Manual Metalworking Lathe (3 Phase 400v)
€33,221.00
Free Delivery on all orders over £50 Ex.VAT to UK Mainland
Features:
- Hardened and ground Z-axis guideway
- Spindle mount Camlock DIN ISO 702-2 No. 8
- Precisely crafted sled
- Handwheels with adjustable fine scale 0.04 / 0.02 mm
- All guides can be adjusted by wedge strips
- Waves and wheels running in oil bath
- Adjustment range upper slide ± 90 °
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Main spindle running in oil bath
- Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
- Clear selection lever for switching the feed rates
- Closed design of the rapid-action feed gear
- Gears and shafts hardened and ground in an oil bath in precision bearings
- Handwheels decoupled and tested according to EN 23125
- Two-channel right-left switch tested to EN 23125
- Switch with life cycle calculation, tested according to EN ISO 13849
- Right / left rotation on bed carriage via switching spindle switchable
- Central lubrication in the bed slide
- Leading spindle
- Emergency stop blow switch, motor protection switch, lockable main switch
- Emergency stop device with foot control
- Safety handwheels with release function in the X and Z axis
- Tailstock for taper turning ± 10 mm adjustable
- Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- LED machine lamp in chip protection
- Electrics with Siemens components
- Energy chain for gentle line and hose routing
- Adjustable scale of the threaded clock
- Quick change steel holder SWH 7-C
- 1 steel holder 32 x 150 type D for square chisel 25 mm
DELIVERY CONTENTS
- Fixed bezel passage max. Ø 165 mm
- Running bezel passage max. Ø 95 mm
- LED machine light
- TH 5615D-TH 5630D: Reduction sleeve MK 7 / MK 5
- TH 5620V: Reduction sleeve Ø 113 mm / MK 5
- Fixed centering point MK 5
- Fixed and revolving centering point MK 5
- Quick change steel holder 7-C
- Steel holder 32 x 150 type D for square chisels
- Threading gauge
- Initial machine filling with quality oil
- Change gear set
- operating tool
Sturdy and efficient manual lathes. Light, medium, and heavy-duty designs that will suit your budget. Take a look at our wide range of conventional lathes for the machine to suit your workshop. Don’t forget to browse those accessories.
|
Dimensions and weights
|
|||
| Length (product) approx. | 4450mm | Height (product) approx. | 1650mm |
| Width/depth (product) approx. | 1150mm | Net weight approx. | 3000kg |
| Work areas | |||
| Max. height | 280mm | Swing diameter above planing slide | 355mm |
| Max. width | 2910mm | Turning length in bed bridge | 170mm |
| Swing diameter above machine bed | 560mm | Bed width | 350mm |
| Swing diameter in bed bridge | 790mm | ||
| Speed range | |||
| Number of gears | 12 | Speed range |
25 – 1600min¯¹
|
| Electric Data | |||
| Drive motor output | 7.5kW | Mains frequency | 50Hz |
| Supply voltage | 400V | ||
| Spindle | |||
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 | Spindle bore/rod passage diameter | 80mm |
| Spindle cone | MT 7 | Tool holder max. chuck height | 25mm |
| Tailstock | |||
| Tailstock chuck | MT 5 | Tailstock quill diameter | 75mm |
| Tailstock quill stroke | 180mm | ||
| Pitches | |||
| Metric pitch | 0.2 – 14mm/rev | Diametrical pitch | 4 – 112DPI |
| Number of metric pitches | 47 | Number of diametrical pitches | 50 |
| Imperial pitch | 112 – 2Threads/1″ | Modular thread pitch | 0.1 – 7mm/rev |
| Number of imperial pitches | 60 | Number of modular thread pitches | 34 |
| Travel | |||
| Travel X axis | 130mm | Travel Z axis | 316mm |
| Feed | |||
| Longitudinal feed range | 0.059 – 1.646mm/rev | Flat feed range |
0.020 – 0.573mm/rev
|
| Number of longitudinal feeds | 35 | Number of flat feeds | 35 |
|
Electrical connections
|
|||
| Total rated value | 8.5kW |
| Brand | OPTIturn |
|---|
Related products
Heavy Duty Lathes
Excel Machine Tools Heavy Duty Metalworking Precision Lathe X L43
€0.00
This product has multiple variants. The options may be chosen on the product page
Heavy Duty Lathes
€0.00
This product has multiple variants. The options may be chosen on the product page
Heavy Duty Lathes
Optimum OPTIturn TH 6630D Center And Spindle Manual Metalworking Lathe (3 Phase 400v)
€41,821.00