Optimum OPTIturn TM 3310 Centre and spindle lathe Manual Metalworking Lathe (3 Ph 400v)
€7,390.00
Free Delivery on all orders over £50 Ex.VAT to UK Mainland
Features:
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- DC 24 Volt – electrics
- Smooth running feed gear with rounded gear wheels running in an oil bath
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengaging function according to EN23125 in the X and Z axis
- Right/left rotation switchable on the carriage
- Two-channel right/left switch, tested according to EN 23125
- Switch rod on carriage for selection of longitudinal or cross feed
- Switch tested with life cycle calculationft according to EN ISO 13849
- Hardened main spindle mounted in adjustable, precise taper roller bearings
- Machine base in stable steel construction
- Motor protection switch
- Main motor electrically braked
- Quadruple steel holder
- Emergency stop pushbutton right and left
- Three-jaw lathe chuck in standard scope of delivery
Delivery Contents
- three-jaw lathe chuck Ø 160 mm, No. 4
- LED machine light
- Reducing sleeve MK 5 / MK 3
- Non-rotating centring tip MK 3
- Quadruple steel holder 16 mm
- Change gear set
- Machine base
- Machine first filling with quality oil
- Operating tool
Optimum OPTIturn TM 3310 Centre and spindle lathe Manual Lathe
The centre lathes and bar lathes convince by their stable construction and easy handling. TM 3310D with digital position display DPA 31
Technical Data
|
Dimensions and weights
|
|||
| Length (product) approx. | 1814mm | Height (product) approx. | 1263mm |
| Width/depth (product) approx. | 740mm | Net weight approx. | 469kg |
| Work areas | |||
| Max. height | 165mm | Swing diameter above planing slide | 216mm |
| Max. width | 1000mm | Bed width | 190mm |
| Swing diameter above machine bed | 330mm | ||
| Speed range | |||
| Number of gears | 9stages | Speed range |
65 – 2000min¯¹
|
|
Electrical Data
|
|||
| Drive motor output | 1.5kW | Mains frequency | 50Hz |
| Supply voltage | 400V | ||
| Spindle | |||
| Spindle chuck | Camlock DIN ISO 702-2 No. 4 | Spindle cone | MT 5 |
| Spindle bore/rod passage diameter | 38mm | Tool holder max. chuck height | 16mm |
| Tailstock | |||
| Tailstock chuck | MT 3 | Tailstock quill diameter | 38mm |
| Tailstock quill stroke | 100mm | ||
| Pitches | |||
| Metric pitch | 0.4 10mm/rev | Imperial pitch |
56 – 4Threads/1″
|
| Number of metric pitches | 29 | ||
| Travel | |||
| Travel X axis | 90mm | Travel Z axis | 168mm |
| Feed | |||
| Longitudinal feed range | 0.02 0.4mm/rev | Flat feed range |
0.01 0.2mm/rev
|
| Number of longitudinal feeds | 24 | Number of flat feeds | 32 |
| Brand | OPTIturn |
|---|
Related products
Medium Duty Lathes
Optimum OPTIturn TU 2807V Variable Speed Manual Metalworking Lathe (1 Phase 230v)
€3,100.00
Medium Duty Lathes
€2,799.00
This product has multiple variants. The options may be chosen on the product page
Medium Duty Lathes
Optimum OPTIturn TU 3008V Variable Speed Manual Metalworking Lathe (230V)
€4,990.00