Optimum OPTIturn TX 5216 Manual Metalworking Lathe
€31,850.00
Free Delivery on all orders over £50 Ex.VAT to UK Mainland
DESCRIPTION
-
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High stiffness of the headstock housing due to heavily ribbed 25GG casting
- All gears of the feed gear made of steel, hardened and ground
- Waves on needle bearings, all components are lubricated in an oil bath
- Hardened and ground spindle ensures tremendous accuracy and durability
- Due to the high cutting performance, a high chip removal during roughing is no problem
- Service-friendly removable rear panel
- Energy chain for gentle line and hose routing
- Lockable chip protection moves with the bed slide with integrated position indicator and coolant hose, manually displaceable
- Decoupled handwheels tested to EN 23125
- Two-channel right-left switch tested to EN 23125
- No change wheels needed
- Switch with life cycle calculation tested according to EN ISO 13849
- With safety device against simultaneous operation of threading and feed mechanism
- Bed guides hardened and precision ground
- Electronically braked engine
- Electronic feed shutdown of the Z axis
- All electronic controls to reach centrally
- Complete illumination of the workspace
- External coolant tank with level indicator and oil separator
- Complete guide and tension spindle cover
- Electrical position switch off with quadruple position stop
- 3-jaw lathe chuck in the standard scope of delivery
- Quick change steel holder SWH 7-C
- 1 steel holder 32 x 130 type D for square chisel 25 mm
- Digital Position Display DP700 (For more information see “NEWALL-DP700”)
TX 5216
- Large spindle bore Ø 80 mm
DELIVERY CONTENTS
- Three jaw chucks
- Reduction sleeve MK 7 / MK 5
- Fixed center point MK 5 long
- Fixed centering point MK 5 short
- Quick change steel holder SWH 7-C (TX 5216)
- Quick change steel holder SWH 7-C (TX 6222)
- Steel holder 25 x 120 type D for square chisels
- operating tool
Precision guide and drawbar turning machine
Precision master and spindle lathes meet the highest requirements in terms of technical equipment and precision. With digital position indicator NEWALL DP 700
|
TECHNICAL DATA
|
|||
|
Dimensions and weights
|
|||
| Length (product) approx. | 3000mm | Height (product) approx. | 1860mm |
| Width/depth (product) approx. | 1195mm | Net weight approx. | 2470kg |
| Work areas | |||
| Max. height | 260mm | Swing diameter above longitudinal slide | 520mm |
| Max. width | 1600mm | Swing diameter above planing slide | 324mm |
| Swing diameter above machine bed | 520mm | Turning length in bed bridge | 780mm |
| Swing diameter in bed bridge | 780mm | Bed width | 280mm |
| Speed range | |||
| Number of gears | 12 | Speed range |
30 – 1500min¯¹
|
| Electric Data | |||
| Drive motor output | 5.5kW | Mains frequency | 50Hz |
| Supply voltage | 400V | ||
|
Cooling lubricant system
|
|||
| Cooling lubricant system coolant pump output | 60W | ||
| Spindle | |||
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 | Spindle cone | MT 7 |
| Spindle bore/rod passage diameter | 80mm | ||
| Tailstock | |||
| Tailstock chuck | MT5 | Tailstock quill diameter | 72mm |
| Tailstock quill stroke | 180mm | ||
| Pitches | |||
| Metric pitch | 0.5 – 15mm/rev | Diametrical pitch | 4 – 120D.P. |
| Imperial pitch | 60 2Threads/1″ | Modular thread pitch |
0.5 – 15mm/rev
|
| Travel | |||
| Travel X axis | 170mm | Travel Z axis | 350mm |
| Feed | |||
| Longitudinal feed range | 0.1 – 3mm/rev | Flat feed range |
0.05 1.5mm/rev
|
|
Electrical connections
|
|||
| Total rated value | 6.1kW |
| Brand | OPTIturn |
|---|
Related products
Heavy Duty Lathes
Optimum OPTIturn TH 5630D Center and Spindle Manual Metalworking Lathe (3 Phase 400v)
€33,221.00
Heavy Duty Lathes
€0.00
This product has multiple variants. The options may be chosen on the product page
€39,681.00
Heavy Duty Lathes
€0.00
This product has multiple variants. The options may be chosen on the product page
€34,490.00
