Optimum OPTIturn TX 6222 Manual Metalworking Lathe (3 Phase 400V)

• • Machine bed made of heavily ribbed cast iron
  • One-piece machine base made of steel
  • High stiffness of the headstock housing due to heavily ribbed 25GG casting
  • All gears of the feed gear made of steel, hardened and ground
  • Waves on needle bearings, all components are lubricated in an oil bath
  • Hardened and ground spindle ensures tremendous accuracy and durability
  • Due to the high cutting performance, a high chip removal during roughing is no problem
  • Service-friendly removable rear panel
  • Energy chain for gentle line and hose routing
  • Lockable chip protection moves with the bed slide with integrated position indicator and coolant hose, manually displaceable
  • Decoupled handwheels tested to EN 23125
  • Two-channel right-left switch tested to EN 23125
  • No change wheels needed
  • Switch with life cycle calculation tested according to EN ISO 13849
  • With safety device against simultaneous operation of threading and feed mechanism
  • Bed guides hardened and precision ground
  • Electronically braked engine
  • Electronic feed shutdown of the Z-axis
  • All electronic controls to reach centrally
  • Complete illumination of the workspace
  • External coolant tank with level indicator and oil separator
  • Complete guide and tension spindle cover
  • Electrical position switch off with quadruple position stop
  • 3-jaw lathe chuck in the standard scope of delivery
  • Quick change steel holder SWH 7-C
  • 1 steel holder 32 x 130 type D for square chisel 25 mm

• Digital Position Display DP700 

TX 5216

• Large spindle bore Ø 80 mm

TX 6222 Included:

• Larger spindle bore Ø 105 mm
•  Three jaw chucks
•  Reduction sleeve MK 7 / MK 5
•  Fixed center point MK 5 long
•  Fixed centering point MK 5 short
•  Quick change steel holder SWH 5-B (TX 5216)
•  Quick change steel holder SWH 7-C (TX 6222)
•  Steel holder 25 x 120 type D for square chisels
•  operating tool